Tray size and type. Network Summary The Network Summary screen shows the values for all of the network settings that are available for the product. Please try again shortly.
Set the number of copies in the software program, whenever possible. Don’t show me this message again. For more information regarding the Optimize menu options, see Optimize modes.
Use this feature to choose the direction of the print job. Settings tab Use the Settings tab to view and change settings for the following features:. This is the default setting. The copies value will not advance from the maximum number to 1 when the up arrow is used, or change from 1 to the maximum number when the down arrow is used.
Print-mode adjustments swries the second side of a duplexed page are.
HP Color LaserJet CP Printer Series – HP Embedded Web Server | HP® Customer Support
The values for host name and domain names are retrieved from the firmware and displayed on this screen.
Device Configuration The Device Configuration screen shows the values for all of the settings available for the product and other configuration items, such as installed DIMMs, personalities, and page counts. You’ll probably need to be logged in with administrator credentials in order to change the device settings.
Disabled if configured by DHCPv6. Print-mode adjustments for the second side of a duplexed page are automatic. Lasernet icon indicates that duplex printing is not advised. In most cases, the software program and the driver communicate, so that the number of copies set in one location such as the program appears in the other such as the driver. Network Summary The Network Summary screen that appears on the Networking tab is the same screen that appears on the Status tab.
By pressing ‘print’ button you will print only current page. See your browser’s documentation for specific instructions. This information is not available if a non-HP cartridge is installed in the product. Paper Types Use the Paper Types screen to map the print modes that the printer will use for each paper type.
Print on both sides of the page (duplex printing) | HP Color Laserjet CP
Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar. If Automatic IP is configured, the Manual IP Dplex configuration settings are disabled, but the values for these settings are still displayed if they have been set.
Advanced Use the Advanced screen to configure the enabled settings and other settings, such as link speed, for the printer. Print Density Use the settings on the Print Density screen to adjust the amount toner the printer uses for images, pages, and documents.
Find the printer’s serial number, which is listed under the Product Information subheading. If the Duplex unit is not listed, it needs to be installed in the printer driver.
HP Color LaserJet CP2025dn/x Printers – Configure Auto-Duplex, 2-sided Printing On Both Sides
Click Apply to keep changes. How does HP install software and gather data? Change the default settings by clicking the blue arrow next to each option and highlighting the selection. Please try again shortly. The ‘automatic discovery’ feature used by some Windows drivers on installation or update doesn’t always work; ensure that the driver knows that a duplex unit is present on the printer assuming that one is present: